5G Hotspot Router Bundle – NEXP1GO with Quectel RM500Q-AE 5G Modem – LTE FIX



Our 5G Hotspot Router Bundle – NEXP1GO with Quectel RM500Q-AE 5G Modem is all you need to assemble a complete functioning 5G cellular hotspot router using the high performance Quectel Wireless RM500Q-AE 5G wireless cellular modem together with the WiFiX NEXP1GO router.

The Wireless Haven has put together this complete 5G internet hotspot router bundle with all the necessary parts for you to assemble a cellular gateway router, taking the guesswork out of parts purchasing. We match all the parts exactly as we like to build them ourselves, as well as from favorite builds by our community over at https://wirelessjoint.com.

The Quectel RM500Q-AE is a 4×4 MIMO modem, meaning it uses 4 separate antennas. That means that you have to add a second pair of antennas to the router itself. That requires an additional two 1/4″ holes in the router case to install the extra 2 antenna connectors. This kit includes a full set of 4 antennas as well as the four needed antenna connectors for the modem to router.

This kit can be paired with our convenient to mount all in one 4×4 MIMO outdoor antenna for a strong signal when outdoor antennas are needed for signal improvements, or a pair of our High Beam X2 antennas for even more boost. We also have an all in one antenna bundle for mounting this router and modem in our outdoor 4×4 MIMO antennas enclosure.

The Quectel Wireless RM500Q-AE is a very powerful modem and has power requirements that can be more than the stock power adapter that comes with most routers. Because of this we have added our 4A power supply to the list of items in the bundle. We want to make sure you have all the amps you will need to deliver reliable modem power.

NOTICE: The RM500Q-AE is also a Category 22 LTE modem. LTE and 5G in one modem. This is a “5GNR” modem. It supports “New Radio” 5G bands, it does not support mmWave 5G bands.

For full details of each product, please see their individual listing pages below:
NEXP1GO Gigabit Cellular Router
Quectel RM500Q-AE 5G Cellular Modem
Mini-PCIe to M.2 (NGFF) Key B 4G 5G Modem Adapter
12V 4.0A 48W Power Adapter with 2.1mm Tip

Qty 2 – 5″ MHF4 to SMA FBH 1.13mm Pigtails
Qty 2 – 10″ MHF4 to SMA FBH 1.13mm Pigtails

700-2700MHz 5dBi Cellular Hotspot Omni-directional Antennas (SMA Connectors) – Pair
WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems

Optional Items:
600-3800MHz Cellular Omni-Directional Paddle Antennas (SMA Connectors) PAIR
5 In 1 SIM Card Adapter Kit With Emery Sanding Board
Copper Heatsink for 5G Modems – 4mm – Low Clearance
Highly recommended! 
The Wireless Haven Modem Firmware Update Service
Router Build Assembly and Configuration Service Level 2

 


NOTE:
This is a bundle of individual parts that the customer must assemble and configure themselves. If you would like it to be assembled for you, we offer this as an additional service. Add the Router Build Assembly and Configuration Service Level 2 item to your cart by checking the box next to it, on the item options to the right of this description.


PLEASE NOTICE:
 
Cellular service providers may require activating a specific hotspot data plan to use on a cellular internet device.   The carriers are constantly updating and/or modifying existing cellular plans.   It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components.

LEARN MORE ABOUT THESE COMPLETE LTE ROUTER KITS!

Next Post

806-2170MHz 4G LTE Antennas and Cisco Extension

Wed Feb 16 , 2022
806-2170MHz 4G LTE Antennas and Cisco Extension Base Package (Two Units) The 806-2170MHz  4G LTE antenna is an Omni-directional dipole antenna designed for indoor use on 4G LTE routers.  It is compatible with enhanced high-speed modems and WAN cards, and supports 4G Long Term Evolution (LTE) networks. The antennas have […]

Newsletter

COMING SOON! Signup for our newsletter, get hot news plus speical deals from us and our partners...

Best Omni-Directional on Market